Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa Specification

Seal Material
Silicone

Thread
1/8 NPT

Grade
Industrial

Sensor Type
Differential Pressure Transmitter

Display
Digital

Outer Size
92 mm x 90 mm x 37 mm (L x W x H)

Material
ABS Plastic

Processing Type
Electronic

Diameter
92 mm

Mount Type
Wall Mounted

Scale Range
0 - 622 Pa

Accuracy
1% of Full Scale

Finishing
ABS Plastic Housing

Measure Pressure Of
Steam, Oil, Gas

Accessories
Mounting Screws, Calibration Certificate

Electrical Connection
Screw Terminals

Zero and Span Adjustment
Push-button Adjustments

Operating Temperature Range
-10C to +50C

Protection Class
IP54

Power Supply
24V AC/DC

Output Signal
4-20 mA / 0-10V Selectable

Series
DPT10-R8

Response Time
< 1s

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cash Advance (CA)

Main Export Market(s)
Asia

Main Domestic Market
Dadra and Nagar Haveli, Chandigarh, Himachal Pradesh, Andaman and Nicobar Islands, South India, North India, East India, Andhra Pradesh, Assam, Arunachal Pradesh, Bihar, Chhattisgarh, Goa, Haryana, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Mizoram, Meghalaya, Manipur, Punjab, Pondicherry, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Nagaland, Odisha, Uttarakhand, Daman and Diu, Lakshadweep, Uttar Pradesh, Maharashtra, Delhi, Gujarat, Central India, West India, All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Advanced Pressure Measurement for Industrial Applications

The DPT10-R8 is tailored to monitor differential pressures in steam, oil, and gas systems, ensuring precise control in diverse environments. Its digital display improves readability, and quick push-button adjustments provide simple calibration. Combining robust IP54 protection with accurate output, it suits critical industrial needs.

Robust Design and Easy Installation

Housed in ABS plastic with a silicone seal and diameter of 92 mm, the transmitter stands out for durability. It includes screw terminal electrical connections and all necessary mounting hardware, making wall installation straightforward and secure for operators and technicians.

FAQ's of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 622 Pa:

Q: How do I select the output signal for the DPT10-R8 transmitter?

A: You can easily select between the 4-20 mA and 0-10V output signals using the integrated selector switch during installation, allowing compatibility with various monitoring or control systems.

Q: What types of media can this differential pressure transmitter measure?

A: The DPT10-R8 is designed to measure differential pressure in steam, oil, and gas, making it suitable for a wide range of industrial fluid and gas monitoring applications.

Q: When should I perform zero and span adjustment, and how is it done?

A: Zero and span adjustments should be conducted during initial setup and periodically as part of routine maintenance to maintain measurement accuracy. Adjustments are performed via convenient front-mounted push-buttons.

Q: Where should the DPT10-R8 be installed for optimal performance?

A: This transmitter is intended for wall mounting in environments within the -10C to +50C operating temperature range. Ensure it is installed in a location that is dry, within its IP54 protection class, and accessible for display monitoring and maintenance.

Q: What is the process for electrical connection?

A: The transmitter uses screw terminal connections, ensuring a secure and straightforward wiring process. Follow the included wiring diagram for correct and safe connection to your power supply and measurement system.

Q: What benefits does the fast response time provide?

A: With a response time of under 1 second, the DPT10-R8 ensures near-instant readings, critical for real-time process adjustments and prompt detection of pressure fluctuations in demanding industrial environments.

Tell us about your requirement