Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar Specification

Grade
Industrial

Sensor Type
Differential Pressure Sensor

Seal Material
Silicone

Thread
1/8 NPT Female

Outer Size
See Diameter

Material
Polycarbonate, ABS

Processing Type
Electronic

Diameter
Approx. 95 mm (housing)

Mount Type
Wall or duct mount

Scale Range
0 - 62.5 mbar

Accuracy
1% of span

Finishing
Polycarbonate housing

Measure Pressure Of
Steam, Oil, Gas

Accessories
Mounting screws (included), installation manual

Electrical Connection
Screw terminal block

Zero and Span Adjustment
Push button

Power Supply
12 to 30 VDC

Compliance
CE, RoHS

Operating Temperature Range
-10C to +60C

Long Term Stability
< 0.5% F.S. per year

Output Signal
4-20 mA, 2-wire

Ingress Protection
IP65

Pressure Connection
Barbed for 6 mm ID tubing

Weight
Approx. 135 g

Response Time
< 5 s

Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar Trade Information

Payment Terms
Cash on Delivery (COD), Cash Advance (CA), Cash Against Delivery (CAD), Cash in Advance (CID)

Main Export Market(s)
Asia

Main Domestic Market
Himachal Pradesh, Pondicherry, Nagaland, South India, East India, West India, Andaman and Nicobar Islands, Assam, Arunachal Pradesh, Bihar, Chandigarh, Goa, Jammu and Kashmir, Jharkhand, Karnataka, Madhya Pradesh, Mizoram, Meghalaya, Manipur, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Uttarakhand, Daman and Diu, Dadra and Nagar Haveli, Lakshadweep, Uttar Pradesh, Maharashtra, Haryana, Delhi, Gujarat, North India, Andhra Pradesh, Kerala, Central India, Odisha, Chhattisgarh, All India

About Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar

Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Reliable Differential Pressure Measurement

The DPT30-R8 transmitter ensures accurate and consistent monitoring of differential pressure across steam, oil, or gas lines, boasting a precision of 1% of span. Its durable design, IP65 rating, and electronic processing make it ideal for demanding industrial conditions. Regular operation is facilitated by a quick response time and easy-to-use push-button calibration for zero and span adjustments.

Easy Installation and Operation

Featuring a wall or duct mount design with included mounting screws, the DPT30-R8 supports quick and simple setup. The barbed connections suit 6 mm ID tubing, and electrical wiring is straightforward with screw terminals. Its lightweight construction and clear installation manual ensure minimal downtime during commissioning, enhancing operational efficiency.

Durable Construction and Compliance

Housed in tough polycarbonate/ABS with a silicone seal, the DPT30-R8 withstands industrial environments, resisting dust and water ingress to an IP65 standard. Compliance with CE and RoHS regulations ensures user safety and environmental friendliness, while robust long-term stability reduces maintenance frequency and operational costs.

FAQ's of Sensocon USA Differential Pressure Transmitter Series DPT30-R8 - Range 0 - 62.5 mbar:

Q: How do I install the Sensocon DPT30-R8 differential pressure transmitter?

A: To install the DPT30-R8, simply mount it to a wall or duct using the included screws, connect your tubing to the barbed 6 mm ID pressure ports, and wire the power and output signals to the screw terminal block. The installation manual guides you through each step for optimal performance.

Q: What applications are suitable for this pressure transmitter?

A: The DPT30-R8 is designed for accurate measurement of differential pressure in steam, oil, and gas lines, making it ideal for HVAC systems, process control, industrial automation, and energy management applications requiring a 0-62.5 mbar range.

Q: When should I use the zero and span adjustment feature?

A: You should use the zero and span adjustment push buttons during initial setup, routine calibration, or when replacing tubing or relocating the transmitter to ensure precise and reliable measurements.

Q: Where can I mount the DPT30-R8 transmitter?

A: This transmitter can be wall or duct mounted using the supplied screws. Its compact housing (approximately 95 mm diameter) and IP65 rating make it suitable for installation in various industrial environments, including areas exposed to dust or moisture.

Q: What is the process for connecting the transmitter electrically?

A: Wiring involves linking the 2-wire 4-20 mA output and power supply (12-30 VDC) directly to the screw terminal block inside the housing. Reference the provided installation manual for specific connection diagrams and safety guidelines.

Q: How does using the DPT30-R8 benefit my operation?

A: The DPT30-R8's robust accuracy, fast response, and long term stability (<0.5% F.S. per year) minimize maintenance and improve process control. Its user-friendly calibration and rugged construction ensure consistent pressure monitoring and operational safety.

Q: What certifications and protections does this transmitter offer?

A: The DPT30-R8 complies with CE and RoHS standards, ensuring product safety and environmental compatibility. Its polycarbonate and ABS enclosure is rated IP65, offering solid protection against dust and water ingress.

Tell us about your requirement