Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Get a Price/Quote

MOQ : 5 Pieces

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar Specification

Grade
Industrial Grade

Seal Material
Silicone

Sensor Type
Capacitive Differential Pressure Sensor

Thread
No Thread - Barbed Pressure Ports

Display
No Onboard Display

Outer Size
Approx. 90 x 78 x 36 mm (L x W x H)

Material
ABS Plastic, Electronic Components

Processing Type
Factory Calibrated

Diameter
Not Applicable - Rectangular Housing

Mount Type
Panel or Wall Mount

Scale Range
0 - 1.25 mbar

Accuracy
1% of Span

Accessories
Mounting Screws, Instruction Manual

CE Certification
Yes

Ingress Protection
IP54

Applicable Standards
RoHS, CE Marked

Zero Adjustment
Manual Push Button

Operating Temperature Range
-10C to +60C

Power Supply
10-30 VDC

Weight
Approx. 120 grams

Response Time
< 1 sec

Max Overpressure
50 mbar

Electrical Connection
Screw Terminal Block

Pressure Connection
6 mm Barbed Ports

Output Signal
4-20 mA, 2-wire

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar Trade Information

Minimum Order Quantity
5 Pieces

FOB Port
delhi

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID)

Supply Ability
4 Pieces Per Day

Delivery Time
4-6 Days

Sample Available
Yes

Sample Policy
Sample costs shipping and taxes has to be paid by the buyer

Main Export Market(s)
Middle East, Asia

Main Domestic Market
All India

About Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Highly Accurate and Rapid Pressure Measurement

The DPT10-R8 delivers an outstanding measurement accuracy of 1% of span, with a rapid response time under one second. Its factory-calibrated, capacitive differential pressure sensor makes it suitable for critical and dynamic environments, such as process control and industrial automation, where precise pressure monitoring is essential.

User-Friendly Installation and Operation

With a compact ABS plastic housing and smooth finish, the DPT10-R8 ensures easy wall or panel mounting. The 6 mm barbed ports allow straightforward pressure hose connections, and manual zero adjustment is possible via a push button. Its screw terminal electrical connection further simplifies setup, reducing installation time and complexity.

Versatile and Robust for Industrial Use

Built for industrial settings, this transmitter is suitable for a variety of media including steam, oil, and gas. Its IP54-rated enclosure protects against dust and moisture, while silicone seals enhance durability. The DPT10-R8 is compliant with CE and RoHS standards, underscoring its reliability, safety, and commitment to environmental guidelines.

FAQ's of Sensocon USA Differential Pressure Transmitter Series DPT10-R8 - Range 0 - 1.25 mbar:

Q: How do I install the DPT10-R8 differential pressure transmitter?

A: The DPT10-R8 transmitter can be mounted on a panel or wall using the provided mounting screws. Connect the pressure lines to the 6 mm barbed ports, and wire the device using the screw terminal block according to the instruction manual. Ensure the transmitter is supplied with 10-30 VDC power.

Q: What types of media can this transmitter measure pressure for?

A: This model is suitable for measuring the differential pressure of steam, oil, and gas. Its industrial-grade capacitive sensor ensures reliable operation across these media types in demanding environments.

Q: When should I use the manual zero adjustment?

A: Manual zero adjustment is recommended after installation or whenever the device displays a shift from the baseline zero point. The onboard push button allows you to reset the sensor zero easily, ensuring measurement accuracy.

Q: Where can I use the DPT10-R8 in my facility?

A: The DPT10-R8 is designed for use in indoor industrial environments where monitoring of low differential pressures is required, such as HVAC systems, cleanroom monitoring, or process automation lines.

Q: What process does the transmitter use to provide output signals?

A: It employs a capacitive differential pressure sensor to sense pressure differences and converts this to a standardized 4-20 mA current output (2-wire loop powered), which is widely compatible with industrial PLCs and control systems.

Q: What are the benefits of the DPT10-R8's IP54 rating and ABS plastic housing?

A: The IP54 rating protects the device from dust ingress and splashing water, while the durable ABS plastic housing ensures long-lasting performance in industrial settings. These features reduce downtimes and maintenance demands.

Tell us about your requirement