Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC

Send Inquiry

Request To Call Back

Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC

Get a Price/Quote

MOQ : 10 Pieces

Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC Specification

Display
Analog

Bourdon Tube
Not Applicable (Capsule type construction)

Seal Material
Silicone

Thread
1/8 NPT female connection

Outer Size
Approx. 4 inches (101.6 mm) diameter front flange

Sensor Type
Differential Pressure

Grade
Industrial

Material
Die cast aluminum case, acrylic cover

Dial Material
White acrylic with black markings

Pointer Material
Black anodized aluminum

Processing Type
Factory calibrated

Diameter
4 (101.6 mm)

Glass Size
3-5/16 (84.1 mm)

Mount Type
Surface or flush mount

Scale Range
0.125-0-0.125 Inch WC (Water Column)

Accuracy
2% of full scale

Finishing
Textured black acrylic

Measure Pressure Of
Air and compatible gases

Accessories
Two 1/8 NPT plugs, two 1/8 NPT pipe thread to rubber tubing adapters, and three mounting adapters with screws

Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC Trade Information

Minimum Order Quantity
10 Pieces

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cash Advance (CA)

Main Export Market(s)
Middle East, Asia

Main Domestic Market
Chandigarh, Himachal Pradesh, Andaman and Nicobar Islands, Uttarakhand, Daman and Diu, South India, North India, East India, West India, Assam, Arunachal Pradesh, Bihar, Delhi, Gujarat, Goa, Jammu and Kashmir, Jharkhand, Karnataka, Madhya Pradesh, Maharashtra, Mizoram, Meghalaya, Manipur, Punjab, Pondicherry, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Kerala, Nagaland, Dadra and Nagar Haveli, Lakshadweep, Uttar Pradesh, Haryana, Andhra Pradesh, Central India, Odisha, Chhattisgarh, All India

About Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC

Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Dwyer 2300-00 Differential Pressure Gage

Dwyer 2300-00 Differential pressure gage, range 0.125-0-0.125" w.c. (inches of water), minor divisions .005, calibrated for vertical scale position

Using Dwyers simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. Its inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Whats included with the Dwyer 2300-00
Dwyer 2300-00 Magnehelic Differential Pressure Gauge (0.125-0-0.125"w.c.), Vertical Scale
Ask a question about Dwyer 2300-00 Magnehelic Differential Pressure Gauge (0.125-0-0.125"w.c.), Vertical Scale

Precise Differential Pressure Monitoring

The Dwyer 2300-00 Magnehelic Gage excels at detecting minute changes in air or compatible gas pressures, making it ideal for critical environments such as clean rooms, HVAC systems, and filter monitoring. Its sensitive capsule construction and external zero adjustment enable continual accuracy, while the durable materials ensure longevity.

Rugged and Versatile Industrial Design

Constructed with a die-cast aluminum case and a textured acrylic cover, this gage withstands harsh operational conditions. The 2300-00 supports both surface and flush mounting, fitting seamlessly into diverse setups. Its relief protection, operating from -20C to +60C, assures consistent performance under varied pressures.

Comprehensive Installation Accessories

Every 2300-00 unit is shipped with two 1/8 NPT plugs, two pipe thread-to-tubing adapters, and three mounting adapters with screws. These accessories simplify integration and mounting, allowing for quick installation and easy connection to existing pressure lines.

FAQs of Dwyer USA Model 2300-00 Magnehelic Gage Range 0.125-0-0.125 Inch WC:

Q: How does the Dwyer Model 2300-00 Magnehelic Gage measure differential pressure?

A: The Dwyer 2300-00 uses a capsule-type sensor to detect the difference between two air or compatible gas pressure points across its 1/8 NPT female connections. This differential is displayed on a clear analog dial.

Q: What installation options are available for the 2300-00 Magnehelic Gage?

A: This model supports both surface and flush mounting and is supplied with mounting adapters, screws, and connection fittings, enabling versatile placement in HVAC, clean room, or industrial setups.

Q: When should the external zero adjustment screw be used?

A: You should use the external zero adjustment screw to recalibrate the gauge to zero after initial installation, maintenance, or whenever there is drift caused by temperature or environmental changes.

Q: Where can the Magnehelic 2300-00 be used effectively?

A: It is suitable for use in HVAC systems, filter monitoring, air flow measurement, clean room environments, and any application requiring precise, low-range differential pressure measurement.

Q: What benefits does overpressure protection offer in this gauge?

A: The built-in relief plug provides safety by opening at about 25 psig, protecting the instrument from accidental overpressure conditions, thereby ensuring durability and preventing potential damage.

Q: How is the Magnehelic 2300-00 maintained for optimal performance?

A: Regularly inspect the device for signs of wear, keep the dial and connections clean, and use the zero adjustment feature to maintain accuracy. Avoid exposing the unit to pressures or environments outside its specified limits.

Tell us about your requirement