Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC

Send Inquiry

Request To Call Back

Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC

Get a Price/Quote

Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC Specification

Grade
Industrial

Seal Material
Integral Seals (Polymer)

Display
Digital LCD

Thread
No Thread (Push Connection)

Outer Size
Approximately 124 mm x 90 mm x 55 mm

Sensor Type
Differential Pressure Sensor

Material
ABS Plastic, Electronics

Dial Material
Digital (No Dial)

Pointer Material
Digital (No Pointer)

Processing Type
Electronic

Diameter
Not Applicable (Rectangular Type)

Mount Type
Wall Mount

Scale Range
0 - 0.5 in WC (inches Water Column)

Accuracy
1% of FS

Finishing
ABS Plastic Housing, Matte Surface

Measure Pressure Of
Steam, Oil, Gas

Accessories
Mounting Screws and Manual

Temperature Range
-10C to +60C

Output Signal
4-20mA, 0-10V Selectable

Response Time
<1 Second

Weight
Approx. 170g

Power Supply
24V AC/DC

Protection Class
IP54

Electrical Connection
Screw Terminal Block

Model
Series DPT1-R8

Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC Trade Information

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cash Advance (CA)

Main Export Market(s)
Asia

Main Domestic Market
Chandigarh, Himachal Pradesh, Andaman and Nicobar Islands, Pondicherry, South India, East India, West India, Assam, Arunachal Pradesh, Bihar, Goa, Jammu and Kashmir, Jharkhand, Karnataka, Maharashtra, Mizoram, Meghalaya, Manipur, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Kerala, Nagaland, Uttarakhand, Daman and Diu, Dadra and Nagar Haveli, Lakshadweep, Uttar Pradesh, Haryana, Gujarat, Delhi, Madhya Pradesh, North India, Andhra Pradesh, Central India, Odisha, Chhattisgarh, All India

About Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC

Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Accurate Differential Pressure Sensing

Engineered for high-precision monitoring, the Series DPT1-R8 is ideal for industrial pressure measurement in applications handling steam, oil, or gas. The selectable output (4-20mA or 0-10V) provides compatibility with various building automation or control systems.

Versatile and Durable Design

Enclosed in a matte-finish ABS plastic housing with IP54 protection, this sensor withstands challenging industrial conditions. The wall-mount design, push-in connections, and screw terminal block facilitate easy and secure installation. The device is supplied with mounting hardware and a user manual.

User-Friendly Operation with Digital Display

Users benefit from a clear digital LCD display for real-time pressure readings. Electronic processing and polymer integral seals ensure stable, maintenance-free operation. The compact rectangular design allows seamless integration into control panels or machinery.

FAQ's of Sensocon USA Series DPT1-R8 - Range 0 - 0.5 in WC:

Q: How do I install the Sensocon Series DPT1-R8 pressure sensor?

A: The DPT1-R8 is designed for wall mounting and uses push-in connections with a screw terminal block for easy electrical connection. It comes with mounting screws and a manual to guide you through the installation process.

Q: What is the primary usage of this differential pressure sensor?

A: This sensor is primarily used to measure the differential pressure of steam, oil, or gas in industrial applications, providing precise monitoring and control in systems such as HVAC, process automation, and filtration monitoring.

Q: When should I use the 4-20mA versus the 0-10V output signal?

A: Select the 4-20mA output for long-distance signal transmission with better noise immunity in industrial environments. Use the 0-10V output when connecting to controllers or readout devices with voltage input capability over shorter distances.

Q: Where can the sensor be installed for optimal performance?

A: Install the sensor indoors, on a wall, in a protected environment where humidity and dust are minimal, as ensured by its IP54 protection. It is suitable for integration into control panels or positioned on machinery where differential pressure is monitored.

Q: What benefits does the digital LCD display provide compared to analog gauges?

A: The digital LCD display offers immediate, highly readable pressure values with no parallax errors or manual reading interpretation required. This enhances operational accuracy and makes diagnostic checks faster and more reliable.

Q: How accurate is the DPT1-R8 in measuring differential pressure?

A: The DPT1-R8 offers an impressive accuracy of 1% of full scale, making it well-suited for applications demanding precise pressure monitoring within the 0-0.5 inch water column range.

Q: What is the recommended process for routine maintenance?

A: The sensor is designed for maintenance-free operation due to its sealed polymer construction and digital electronics. Periodically ensure the installation area is free from dust build-up and the connections remain secure.

Tell us about your requirement