Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC

Send Inquiry

Request To Call Back

Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC

Get a Price/Quote

Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC Specification

Outer Size
110 mm x 80 mm x 37 mm (L x W x D)

Grade
Industrial

Thread
1/8 NPT Female

Sensor Type
Capacitive Differential Pressure Sensor

Seal Material
Silicone

Display
Digital Display

Material
ABS Plastic Body

Processing Type
Electronic

Mount Type
Wall Mount or Panel Mount

Scale Range
-12.7 to 12.7 mmWC

Accuracy
1% of Full Scale

Finishing
ABS Plastic Housing

Measure Pressure Of
Steam, Oil, Gas

Accessories
Mounting Screws, Instruction Manual

Pressure Connection
2 x 1/8" NPT Female

Response Time
<5 ms

Protection Class
IP65

Enclosure Material
Flame Retardant ABS

Electrical Connection
Screw Terminals

Operating Temperature Range
-10C to +60C

Overpressure Limit
200 mbar

Output Signal
4-20 mA (2-wire)

Model
DPT1-R8

Supply Voltage
12~36 VDC

Zero and Span Adjustment
Accessible via Push Buttons

Weight
Approx. 160 g

Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC Trade Information

Payment Terms
Cash on Delivery (COD), Cash Advance (CA), Cash Against Delivery (CAD), Cash in Advance (CID)

Main Export Market(s)
Asia

Main Domestic Market
Chandigarh, Himachal Pradesh, Andaman and Nicobar Islands, South India, East India, West India, Assam, Arunachal Pradesh, Bihar, Delhi, Gujarat, Goa, Jammu and Kashmir, Jharkhand, Madhya Pradesh, Maharashtra, Mizoram, Meghalaya, Manipur, Punjab, Pondicherry, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Kerala, Nagaland, Uttarakhand, Daman and Diu, Dadra and Nagar Haveli, Lakshadweep, Uttar Pradesh, Haryana, North India, Andhra Pradesh, Central India, Odisha, Chhattisgarh, Karnataka, All India

About Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC

Sensocon USA Differential Pressure Transmitter Series DPT1-R8 - Range -12.7 - 12.7 mmWC

APPLICATIONS

DPT-R8 series devices are commonly used in HVAC/R systems for: Fan, blower and filter monitoring Pressure and flow monitoring Valve and damper control Pressure monitoring in clean rooms

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS DEVICE.

Failure to observe safety information and comply with instructions could result in PERSONAL INJURY, DEATH AND/ OR PROPERTY DAMAGE.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.

To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.

Retain these instructions for future reference.

This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.

SPECIFICATIONS

Performance Accuracy (at applied pressure) Ranges < 0.5 inWC = 0.01 inWC Ranges 0.5 inWC = 1.5% inWC Accuracy specifications include: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error

Thermal Effects Temperature compensated across the full spectrum of capability

Overpressure Proof Pressure: 100 inWC Burst Pressure: 120 inWC

Zero Point Calibration Automatic with function or Manual push-button Auto-Zero

Response Time 4.0 0.8 sec, Selectable via Jumper

Technical Specifications Media Compatibility Dry air or non-aggressive gases

Measuring Units (select via Jumper) Pa, kPa, mbar, inWC, mmWC Measuring Element Piezoresistive

Environment: Operating Temperature: 14 122F (-10 50C) Storage Temperature: -4 158F (-20 70C) Humidity: 0 to 95 % rH, non condensing

Physical Case Dimensions: 3.54 x 3.74 x 1.4 (90.0 x 95.0 x 36.0 mm) Weight: 5.3 oz (150 g) Mounting: 2 each 0.1875 (4.3 mm) screw holes, one slotted Materials: Case: ABS (UL 94 V-0 Approved) Lid: PC (UL 94 V-1 Approved) Protection standard: IP54 / NEMA3

Display (optional) 3 1/2 Digit LCD Backlit Display 2-Line Display (12 character/line) Size: 1.81 W x 0.57 H (46.0 x 14.5 mm)

Electrical connections: 4 screw terminal block Wire: 12-24AWG (0.2 1.5 mm2

Cable Entry Strain Relief: M16 Knockout : 0.625 (16mm)

Pressure Fittings 3/16 (5.2mm) barbed brass + High pressure Low pressure

Electrical Voltage Circuit: 3-wire ([V Out], 24V, GND) Input: 24VAC or VDC, 10% Output: 0-10V or 0-5V, selectable via Jumper Power Consumption: <1.0W Resistance Minimum: 1k

Current Circuit: 3-wire (mA Out, 24V, GND) Input: 24VAC or VDC, 10% Output: 4

Tell us about your requirement