Kimo Make CP 110 PRESSURE TRANSMITTER

Get a Price/Quote

Kimo Make CP 110 PRESSURE TRANSMITTER Specification

Thread
1/4 tapered gas or M8 quick connection

Grade
Industrial

Sensor Type
Differential Pressure Sensor

Outer Size
Compact enclosure, approx. 90 x 80 x 43 mm

Display
4-digit LCD digital display

Material
ABS plastic enclosure

Dial Material
Not applicable (digital display)

Pointer Material
Not applicable (digital display)

Processing Type
Electronic

Mount Type
Wall mounted

Scale Range
Selectable from -100/+100 Pa to -2000/+2000 mbar (different models)

Accuracy
0.5% of reading 3 Pa

Finishing
ABS plastic housing

Measure Pressure Of
Air and neutral gases

Accessories
Mounting kit included

Kimo Make CP 110 PRESSURE TRANSMITTER Trade Information

Main Export Market(s)
Asia

Main Domestic Market
All India

About Kimo Make CP 110 PRESSURE TRANSMITTER

Kimo Make CP 110 PRESSURE TRANSMITTER

Measuring ranges
CP 111 : from -100 to +100 Pa with EV
CP 112 : from -1000 to +1000 Pa
CP 113 : from -10 000 to +10 000 Pa
CP 114 : from -500 to +500 mbar
CP 115 : from -2000 to +2000 mbar
Technical data
ABS housing - IP 65
With or without 10-digits LCD display
0-10 V or 4-20 mA output
Housing with simplified mounting system
Software or DIP switch configuration
Quick and easy mounting with the 1/4 turn system with wall-mount plate
Options:

CP11X followed by: A or P then O or N

A - Active 0-10 V or 4-20 mA

P - Passive 4-20 mA

Display (Yes - O/No - N)

Please note that The CP111 is only available in active

Versatile Output & Scale Range

The CP 110 transmitter provides flexible output choices, with both 0-10 V and 4-20 mA signal options available based on the selected model. Its scale range can be tailored from -100/+100 Pa to -2000/+2000 mbar, making it suitable for a wide variety of pressure measurement tasks. This adaptability lets users integrate the transmitter seamlessly into diverse industrial setups.

Reliable and Rugged Construction

Featuring an IP65-rated front panel and ABS plastic enclosure, the transmitter withstands challenging industrial environments. Its compact footprint, mounting kit, and front-accessible zero point adjustment enable quick and secure installation. The devices electronic processing ensures accurate, real-time measurements with adjustable response time to suit specific application needs.

User-Friendly Operation and Display

Designed for convenience, the transmitter boasts a front-facing, four-digit LCD for easy data reading. Zero point adjustment via a dedicated button ensures straightforward calibration, while quick connection options (1/4" tapered gas or M8) facilitate swift setup. With an operating temperature range from 0C to +50C and storage down to -10C, it accommodates various workplace demands.

FAQs of Kimo Make CP 110 PRESSURE TRANSMITTER:

Q: How do I adjust the zero point on the Kimo CP 110 Pressure Transmitter?

A: Zero point adjustment is performed manually via a front-accessible button. Press and hold the button according to the user manual instructions to calibrate the zero reference for accurate pressure readings.

Q: What are the available output signals for this pressure transmitter?

A: The CP 110 supports either 0-10 V or 4-20 mA output signals, depending on the model selected. The device can operate as a 2-wire or 3-wire system, making it compatible with a variety of industrial control setups.

Q: Where can this pressure transmitter be installed and what mounting options are provided?

A: The CP 110 is designed for wall-mounted installation and comes with a mounting kit included. Its IP65 front panel and compact ABS plastic enclosure allow for secure installation in industrial settings.

Q: What type of gases can the CP 110 measure, and what is its accuracy?

A: This transmitter is suitable for measuring the pressure of air and neutral gases only. It delivers a high accuracy of 0.5% of the reading plus 3 Pa, ensuring reliable monitoring.

Q: What are the environmental limits for installing and storing the CP 110?

A: The device operates efficiently between 0C and +50C and can be stored safely in temperatures ranging from -10C to +70C, making it fit for a diverse range of environments.

Q: Why should I choose the Kimo CP 110 for my industrial application?

A: The CP 110 offers precise differential pressure measurements, flexible output options, robust IP65 protection, easy wall-mounting, and user-friendly controls, making it an excellent choice for reliable and accurate industrial pressure monitoring.

Tell us about your requirement