Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC

Send Inquiry

Request To Call Back

Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC

Get a Price/Quote

MOQ : 10 Pieces

Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC Specification

Seal Material
Silicone Rubber

Grade
Industrial

Outer Size
4 (101.6 mm) Diameter

Thread
1/8 NPT Female Side and Back High/Low Pressure Ports

Display
Analog Dial

Sensor Type
Differential Pressure

Bourdon Tube
Not Applicable (Uses Diaphragm Type Sensing Element)

Material
Die-Cast Aluminum Housing, Acrylic Lens

Dial Material
Aluminum White Background with Black Markings

Pointer Material
Precision-Balanced Aluminum Pointer

Processing Type
Mechanical Gage

Diameter
4 inch (101.6 mm)

Glass Size
4 inch Diameter Acrylic Lens

Mount Type
Surface or Flush Mounting

Scale Range
0-10 Inch WC (Water Column)

Accuracy
2% of Full Scale

Finishing
Black Die-Cast Aluminum Case with Painted Finish

Measure Pressure Of
Air and Compatible Gases

Accessories
Two 1/8 NPT Plugs, Two Mounting Screws, and Surface Mounting Bracket Supplied as Standard

Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC Trade Information

Minimum Order Quantity
10 Pieces

Payment Terms
Cash on Delivery (COD), Cash Against Delivery (CAD), Cash in Advance (CID), Cash Advance (CA)

Main Export Market(s)
Middle East, Asia

Main Domestic Market
Dadra and Nagar Haveli, Chandigarh, Manipur, Uttarakhand, Daman and Diu, South India, East India, Andaman and Nicobar Islands, Andhra Pradesh, Assam, Arunachal Pradesh, Bihar, Delhi, Gujarat, Goa, Haryana, Jammu and Kashmir, Jharkhand, Madhya Pradesh, Maharashtra, Mizoram, Meghalaya, Nagaland, Punjab, Pondicherry, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, West Bengal, Lakshadweep, Uttar Pradesh, North India, Kerala, Central India, Odisha, West India, Chhattisgarh, Himachal Pradesh, Karnataka, All India

About Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC

Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC

Description

Dwyer 2010 Differential pressure gage, range 0-10" w.c. (inches of water), minor divisions .10.

Using Dwyer's simple, frictionless Magnehelic Gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

The Magnehelic Gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Features

Bezel provides flange for flush mounting in panel.

Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Precision litho-printed scale is accurate and easy to read.

Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.

Pointer stops of molded rubber prevent pointer over-travel without damage.

"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.

Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.

Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.

Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.

Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.

Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.

Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.

Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.

O-ring seal for cover assures pressure integrity of case.

Rugged Performance for Industrial Applications

Constructed from die-cast aluminum with a painted finish, the Model 2010 Magnehelic Gage ensures reliability in demanding environments such as HVAC systems, clean rooms, and process industries. Its IP54 rating provides effective dust protection, while the wide operating temperature range allows for versatile use in varying climates.

Accurate and Immediate Pressure Measurement

With a range of 0-10 inch WC and 2% full scale accuracy, this gauge offers precise differential pressure monitoring. The mechanical diaphragm sensing element delivers instant response, making it optimal for real-time applications like filter monitoring, duct static pressure checks, and fan performance analysis.

User-Friendly and Easy to Install

This gage offers both surface and flush mounting options for installation flexibility. The analog dial is easy to read, featuring a clearly marked aluminum pointer on an acrylic lens. All essential accessories, including mounting screws and plugs, are included to simplify setup and use.

FAQs of Dwyer USA Model 2010 Magnehelic Gage Range 0-10 Inch WC:

Q: How is the Dwyer Model 2010 Magnehelic Gage typically installed?

A: The Model 2010 Magnehelic Gage can be mounted either on the surface or flush-mounted, with a vertical orientation recommended for the best measurement accuracy. All necessary hardware, including a surface mounting bracket and screws, is supplied as standard.

Q: What applications can this gauge be used for?

A: This gauge is ideal for measuring differential air or compatible gas pressures in a range of industrial applications, including HVAC systems, monitoring filter status, measuring duct static pressure, assessing fan/blower performance, and maintaining clean room pressure environments.

Q: When should the zero adjustment be performed and how is it done?

A: Zero adjustment should be performed during installation and periodic maintenance to ensure accuracy. The Model 2010 features an external screw adjustment for quick and simple zeroing without disassembly.

Q: Where should the Model 2010 Magnehelic Gauge be positioned for optimal results?

A: For maximum accuracy, the gauge should be installed in a vertical position and in a location that allows easy access for monitoring and maintenance. Proper placement ensures the best response and longest service life.

Q: What process does the gauge use to measure pressure?

A: The gauge employs a mechanical diaphragm sensing element to differentiate pressure between two points. When pressure is applied, the diaphragm moves, causing the precision-balanced pointer to indicate the measured pressure on the analog dial.

Q: How does the IP54 enclosure benefit the Magnehelic Gauges operation?

A: The IP54 equivalent enclosure provides significant protection against dust ingress and limited moisture, which ensures reliable operation and longevity in industrial and commercial environments.

Q: What are the advantages of using this gauge for HVAC and cleanroom applications?

A: Its immediate response, high accuracy, and robust construction deliver dependable performance in controlling airflow, detecting filter blockages, and maintaining critical pressure settings, thereby supporting system efficiency and regulatory compliance.

Tell us about your requirement